The finest in antique screwdrivery, this screwdriver is based on an 1904 patent by William Ward, but with several modern improvements.
Each screwdriver is made from 1144 steel, ~9in/22.8cm long, and weighs 1.1lb/500g. The blade is 0.5in/1.27cm wide and 1/16in/1.6mm thick. Blade is hardened to 52 HRC.
The blade on the screwdriver is now a consistent width, unlike the tapered design of most modern screwdrivers, to assist in removal of countersunk screws. The blade tip also has a hollow-ground design ensuring 1/10in/2.5mm of the tip is parallel, allowing for maximum engagement with the fastener. The square shaft allows you to use wrenches to increase the amount of torque you can apply to the fastener if they are really stuck!
Each screwdriver is UNIQUELY NUMBERED.
Entirely MADE IN CANADA.
Related products
Power & Hand Tools
Planted Seat Bracket Jeep Wrangler JK 4 Door (2007-2018) LOW – Driver *Mounts to floor not pedestal
Power & Hand Tools
Planted Seat Bracket Honda Civic [10th Generation} (2016 ) – Driver
Power & Hand Tools
Power & Hand Tools
Planted Seat Bracket Ford Fusion [2nd Generation] (2013 ) – Driver